PC Help And Information Easy Maintenance And Free Software
 
HomePortalFAQSearchRegisterLog in

Share | 
 

 FXS 1.3.9 & FXS 1.3.10betta Tutorial & Config

View previous topic View next topic Go down 
AuthorMessage
Steve™
Management

Management
avatar

Male
Number of posts : 2447
Home : At Home
Humor : If Im Not Back Later... Wait Longer
Registration date : 2007-07-30

PostSubject: FXS 1.3.9 & FXS 1.3.10betta Tutorial & Config   Thu Aug 09, 2007 8:26 am

Here is the well liked FX Server, its easy to use and customise, some nice features in it,
but this has been known to crash from time to time, suddenly closing for no reason,
the 1.3.9 is more stable than the 1.3.10 betta, but both will crash,
as this server is no longer made, all support has stopped, it has become obsolete,
because it is popular, here is the 2 versions
1.3.9 (fairly stable)


1.3.10 betta (more features but less stable)


FX 1.3.9

FX 1.3.10 Betta


FX Serv 1.3.9 Set Up, the FX Serv 1.3.10 Betta is Below:
Start-up screen Top screen is your user list, the Left screen shows primaries.
Show Room this will show your room on WinMX Peer Network Channels.
Local Host as always admin or not.
Show Commands or not.
Appear Admin or hide the Admin status of the Host.

FXServ access Options menu:
Channel name: Enter your channel name here
Topic: Set your topic that will be displayed in the channel listing.
Motd: Set what your Message Of The Day will be here.
Port: Set what port you want to use. This is best left at 6698.
WPN: This is the number of primaries you want to connect to.
User: set the number of allowed users in. If this is set to 0 no one can get in.
Max Users Connections: Max users with the same IP, For client/bot.
Remove: remove some or all of the numbers that follow a user name.
Exile Default Room: This is to set a room to redirect users to.
Blocked Words: This will block those words and they wont show in the room.
Word Replacement: This will allow you to add replacements for words.
Text Format: Lets you set the format of different admins or users.
Default Users, Agents, and Admins: Lets you can change which formats of text will be for each group of users.
Level Passwords: This is where you can make adjustments to the passwords.

Advanced Options:
AutoKick will stop people from flooding in the room.
Allow Infinite Ban allows bans to be germinate automatically.
Filter Spam does something ?
Log To File logs the room to a file in the server folder.
See Kick/Ban w/ Admin Name allows everyone to see who is kicking/banning.
Check Nickname Cloning lets you see if nicknames are being cloned.
Block Options:
Block /setuserlevel This allows you to take the ability away to set user levels.
Block /exile This allows you to block the ability to use the /exile command.
Block /redirect This blocks the /redirect command.
Block /addpassword This allows you to disable the /addpassword command.
Block /notice This disables the no name command from being used.
Rename Message This is the standard renaming message.
Messages Sent To The Chat When..
Some one is made Admin.
Some one is no longer an Admin.
Someone is made Agent.
Someone is no longer an Agent.
NOTE: If you change these be sure to use the same syntax as is shown above.
Ban List shows the bans on IP’s or both nickname & IP‘s.
Reload Config This will allow you to reload any changes you have made while the channel is up and running.
Refresh User List This will refresh the list for changed user status.
Clear Log Window This will clear the channel window of all text.
Exit Exits the program.

Main Commands: in the channel, by typing /help, we have them listed below.
/me or /action - This is for the purple text.
/motd - Show current motd.
/login - Get admin access.
/colour - Show colour informations.
/setcolour - Set your personal writing colour (replace ? with a number).
/level - Show your access level and stats.
/version - Show server version.
/channelname - Show the full channel name.
/bot - Do not use colours (for bots).
/message - Send a message only to username.

Admin/Agent Commands:
/topic - Set a new room topic.
/setmotd - Set a new motd.
/kick - Kick Username out of the room.
/ban - Ban Username out of the room.
/banip - Ban the specified IP
/kickip - Kick all the specified IPs out of the room
/unban - Unban an IP.
/listbans - Show the list of banned IPs.
/clearbans - Clear the ban list.
/voiceclearbans - Clear the voice ban list.
/level - Show the username access level and stats.
/notice - Write text without the nickname.
/addpassword = - Add a password for the spec. access.
/exile [chatroom] - Exile username to chatroom.
/exileroom - Set the default chatroom for /exile command.
/redirect - Redirect room to another (still only from server).
/disablecolour - Disable colours. Colour codes ignored (except nick’s/Admins).
/enablecolour - Restore colours in the chatroom.
/help - Show this message Smile.
/helplevel - Show informations about access levels.
/kickban - Kick/Ban Username out of the room.
/forcelogin - This is where you can force a login.
/opmsg - Admin message command.
#NEWLINE# - This is the new line command.
/setchannelname - This will set the channel name.
/setchannelname2 - Allows you to show two rooms (one topic for both rooms)
/chatpassword - Sets a channel password for private rooms.

Syntax of command /setuserlevel:
/setuserlevel <+ or - > - add or remove admin access
/setuserlevel reset reset to default access
    a - Action. Able to use /action or /me command.
    v - Voice. Enable user to talk to the chat.
    c - Colour. Able to use /setcolour command.
    C - Caps. Able to use capital letters in text.
    k - Kick. Able to kick someone.
    K - Kick. Able to kick someone, Admins/Agents included.
    b - Ban. Able to kick and ban someone or an IP and to use ban commands.
    B - Ban. Able to kick and ban someone, Admins/Agents included.
    t - Topic. Able to change the topic (/topic command).
    U - Unban. Able to use /unban
    L - Listban. Able to use /listbans
    m - Motd. Able to change the motd (/setmotd command.
    w - Watch commands. Able to see commands of other people.
    i - Watch IPs. Able to see users IPs.
    l - Watch levels. Able to see users level.
    M - Able to see the Messages for the admins.
    n - Able to use /notice command.
    N - Able to send multiple lines with #NEWLINE#.
    q - Allowed to make multiple connections to the chat.
    r - Able to Redirect the channel to another one.
    p - Can send private messages to the chat with /message command.
    J - Can see kick/ban notification messages
    j - Can see who kicks or bans someone
    * - Can change other users access level. (Cannot give a letter not owned.
    f - Flood. Able to flood.
    + - Show a + in the user list.
    @ - Show a @ in the user list.
    A - Gives someone Admin status (Admins get all of these automatically)


Language=ENG or Language=ITA
There are two languages that you can run FXServ in and they are English and Italian,

/Port 1595
This is the port that FXServ will listen on for incoming connections. You have to choose a port that no other program uses.

/setchannelname Test Room
/setchannelname2 The Test Room
This is for you too choose the name of your room

/topic Test Room topic
The topic is displayed after your room name on the WinMX Peer Network Chat page

/setmotd Testing room\nWelcome $NAME$!
The Message Of The Day (MOTD) is the first thing a user sees when he enters the room, a lot of people put pictures etc in this part of the config.
The use of \n means newline,

/TextFormat 1=#c2#<$NAME$#c2# #c1#$TEXT$
Text format is how your text will be displayed in the room, you can configure this to make different styles for different user's
You can use colour codes here but it must contain $NAME$ and $TEXT$ or nothing will be displayed in the room.

/DefaultAccess acCvJj
Default access is what level a basic user joining your room will have on entry,

/DefaultFormat User=1
/DefaultFormat +=2
/DefaultFormat Admin=3
When you are creating text formats you can assign a standard user/member/admin login a certain text style. You do this by setting the text format up how you like and use the corresponding number.

/addPassword agentpass=blw+=2
This is where you create passwords for your admin and ops. The letter corresponds to what you would like that user to be able to do in your room.


Here are the access letters for FX
a - Action.
You can use the command /action text or /me text. This function serves for expressing an action. For example, /me goes to sleep becomes a text in third person.

v - Voice.
It allows the user to write text in the chat or to be able to respond to other users.

c - Color.
You can use the command /setcolour and colour codes. This will allow users to colour their text with the color code of their choice. The command /setcolour also becomes active with this allowed for that user.

C - Capital letters.
You can decide whether or not to allow users to type in all capital letters or not (in chat slang typing in all caps is considered yelling).

k - Kick.
It is the ability to kick users with the command: /kick
K - Kick.
Is to kick users including Admin/Agents. The command is /kick
b - Ban.
It is the ability to kick and ban a user or an IP using the commands /kickban
B - Ban.
It is the ability to kick and ban an user, including an Admin/Agent.
The commands /kickban
L - List Bans.
You can use the command /listbans Every time that someone performs a ban it will be added to the ban list. The /listbans command shows current bans in order starting with the most recent.

U - Unban.
It is the ability to unban a user with the command: /unban
t - Topic.
You can change the Topic (command /topic) from within the chat window.

m - Motd.
You can change the Motd (command /setmotd) The MOTD can be modified from within the chat window.

w - Watch Commands.
With this level you can see the commands of the other users (Watch commands). This level allows users to be able to read the commands typed by anyone including admins. Anything post '/' shows to users with this Access.

i - Show IPs.
You can see user's IPs when they enter.

l - Show Levels.
You can see the levels of the user commands in chat by using the command: /level
M - OpMsg.
You can see the Admin messages. The command: /opmsg
n - Notice.
You can use the command /notice to anonymously write in chat.

N - Newline.
You can send multiple lines with command: #NEWLINE# or \n.This is useful for very long texts. Pretty much only useful for bots etc. not really needed for users.

q - MaxConnections to Room.
This level simply allows a user to make multiple connections with unlimited nicknames used by admins to allow them to enter with Bots or other clients, This also overrides the /MaxConnections setting.

r - Redirect.
This is the ability to redirect the channel to another (/redirect somechat_123456789012). It is a command for Admins only.

p - Private Messages In Channel.
The ability to send private messages (in chat) with the command: /message
f - Flood.
You can send flood messages (usually means more then 5 messages within a few seconds time). Flood messages are enormous trouble for users.

j - View Kicked By.
Here you can choose if you want to publicly display the name of who performs a kick or ban

J - View Name of Kicked/Banned.
The ability to see /kick and /ban messages. This is similar to j access.

* - SetUserLevel.
This allows an admin/you to change the access level of other users through the command: /setuserlevel
+ - Symbol.
Places a + in front of their name in the user list.

@ - Symbol.
Places a @ in front of their name in the user list. This is so users can see who is admin.

/Users 0
With this you can set the server to show a fake amount of people in the room, setting it to 0 shows the actual number of people in the room.

/Limit 600
You can set a limit on the number of people that can enter the room,

/TrimName 9
Trim name removes the numbers that are on the end of your nick name.

/MaxConnections 2
Max connections is the amount of times a person from the same ip can be in the room at the same time.

/Zone 3
Was used on the old peer cache network and can be left as 3.

/WpnConnections 3
This is the amount of primaries that the server will connect to allowing your room to become active and showing on the WinMX Peer Network (WPN).
3-6 connections is fine, the more you have, the more bandwidth you use.

/ConsoleName Server123_23454
This is the name of the server as it shows in the chat room,

/ChatPassword
Set a password for your room if you wish it to be private or members only etc.

The following commands block a user from using these commands in the room and they can only be done in the server window.
If set to "0" they are Enabled, as "1" they are Disabled.

/BlockCommand Redirect=0
If set to "0", this will prevent anyone from redirecting the channel even if they have access level "r".

/BlockCommand Exile=0
Exile is the redirect command used to send a single user to another room with the command: /exile
/BlockCommand addPassword=1
This stops the addition of password or logins. (it is best only host sets logins/passwords)

/BlockCommand Notice=0
This allows users who possess level "n" to write anonymously in the chat.

/BlockCommand SetUserLevel=0
This allows users to set user levels for other users. If set on "1" even those who have level "*" can't set levels for other users.

/BlockCommand ChangeUniform=0
If set on "1" this allows the use of the command /changeUniform (only for mod , admin and Cohost).

/BlockCommand Ignore=0
This blocks the command /ignore you do not wish to see.

/BlockCommand SetColour=1
If set on "1" it stops the command /setcolour
/setAdvOption HideNoVoice=1
This command set on "1" blocks all things that the user says in the chat window while he has had his voice removed, set to "0" allows admins and ops to still be able to see what that user is saying although normal users can not.

/setAdvOption ShowRefused=1
If this command is set on "1" it shows a message to all users in the chat room when another user attempts to unsuccessfully enter the channel.
It also shows the cause of the unsuccessful entry in the case of a nickname not allowed or if the user is in the ban list.

/setAdvOption FloodKick=1
Activates the protection of Autokick, which automatically kicks all the users who send flooding messages without level "f".

/setAdvOption AllowInfiniteBan=1
This allows the use of an infinite ban. All bans will be stored in the file "Banlist" inside the chat folder.

/setAdvOption FilterSpam=1
Blocks the text of spammers who come in just to show a room name or website, and kicks the offender.

/setAdvOption ChatLog=1
This enables logging of the chat.

/setAdvOption SplitLog=0
This is an additional logging function. If set to "1" the server will make a log for each day.

/setAdvOption AutoAdmin=0
This function is for the host of the channel only. If set to "1", the server will automatically set you to co-host.

/setAdvOption checkNameCloning=1
If set to "1" the server will check for identical nicknames so that nobody can clone another person.

/setAdvOption NickColours=1
This command allows users to see coloured nicknames as the owner intended them to be seen. If set to "0" the colours set in the Text Format section of the configuartion will be applied to nicknames.

/setAdvOption ColourCodesVisible=0
This function allows you to enable or disable on demand the visibility of colours in the channel.

/setAdvOption ViewJoinAttempts=1
If set as "1", this function shows Admins when a users attempt to join the channel fails. normally when users have poor connections, or maybe the user is banned.

/setAdvOption RenameMessage=$OLDNAME$#c58 # has changed their nickname to $NEWNAME$,
self explanitary, user has changed his nickname.

/setAdvOption Get@Msg=$NAME $it is admin
/setAdvOption Lose@Msg=$NAME $it is not admin anymore
/setAdvOption Get+Msg=$NAME $it is agent
/setAdvOption Lose+Msg=$NAME $it is not agent anymore

/setAdvOption LogLimit=5
This function sets the scroll of the server or the number of characters that our server will contain in the window. If set as "5", 5000 characters will remain on the server and old text will be removed to make space for the new.

/ShowRoom 1
If set as "1" the server will be visible, If set as "0" the channel won't be visible.

/Block XXXX
This allows you to block offensive words like swear words etc and email companies.

/Replace XXXX=f***
Instead of blocking the swear words you can also replace them with funny or popular words.


Known Issues:

The /redirect command:
When using /redirect to move everyone from one channel to another channel will often �loose� a few users, This often fails to users on a dynamic IP like DSL that will change frequently, and also when users are on a wireless router or a DSL multi/networked connection (having more than 1 pc using same connection) will either not move or will fall out and will not reach the destination.

The /exile command:
When using /exile to send a user from one channel to another channel will often �fail� if the user is on a dynamic IP like DSL that will change frequently, and also when that user is on a wireless router or a DSL multi/networked connection (having more than 1 pc using same connection) the user will probably not move.

Connection Errors:
When a user cannot enter the channel due to a connection error, you will see an admin message stating the users IP and an error code,
Error codes are anything from -5 to -10006, most of the time it means that the user who is trying to enter has got connection or stability problems, or the room/host has a large amount of lag,

Users Can't Enter
If people are reporting not being able to get into your room you need to check a few things.
The first being do you have a router or DSL modem with NAT. If you do have you forwarded ports like you had to do with WinMX?
Is the firewall installed allowing the program on the server port your using.

Hosts's file not found.
This is because the host file that comes with FXServe needs to be manually updated everytime their is a change to the caches, this should not be a problem when using the ws2_32dll patch

Here is an example config
Quote :
Language=ENG

/Port 6698

/setchannelname Test Room
/topic Test Room topic

/setmotd Testing room\nWelcome $NAME$!

/TextFormat 1=#c2#<$NAME$#c2#> #c1#$TEXT$
/TextFormat 2=#c6#<#c2#$NAME$#c6#> #c1#$TEXT$
/TextFormat 3=#c7#<#c2#$NAME$#c7#> #c1#$TEXT$
/TextFormat 4=#c2#$NAME$ #c1#$TEXT$

/DefaultAccess acCvJj

/DefaultFormat User=1
/DefaultFormat +=2
/DefaultFormat Admin=3

/addPassword agentpassw=blw+=2
/addPassword adminpassw=A

/Users 0
/Limit 600
/TrimName 9
/MaxConnections 2
/TrimName 9

/Zone 3

/WpnConnections 3

/ConsoleName Server123_23454

/ChatPassword

/BlockCommand Redirect=1
/BlockCommand Exile=0
/BlockCommand addPassword=1
/BlockCommand Notice=1
/BlockCommand SetUserLevel=0
/BlockCommand ChangeUniform=0
/BlockCommand SetColour=0
/BlockCommand Ignore=0
/BlockCommand Blind=0

/setAdvOption FloodKick=1
/setAdvOption AllowInfiniteBan=1
/setAdvOption FilterSpam=1
/setAdvOption AutoAdmin=1
/setAdvOption checkNameCloning=1
/setAdvOption NickColours=1
/setAdvOption ColourCodesVisible=0
/setAdvOption ViewJoinAttempts=1
/setAdvOption ShowRefused=1
/setAdvOption RenameMessage=$OLDNAME$ #c8#is now known as $NEWNAME$
/setAdvOption Get@Msg=$NAME$ is now an Admin
/setAdvOption Lose@Msg=$NAME$ is no longer an Admin
/setAdvOption Get+Msg=$NAME$ is now an Agent
/setAdvOption Lose+Msg=$NAME$ is no longer an Admin
/setAdvOption LogLimit=10
/setAdvOption SplitLog=1
/setAdvOption ChatLog=1
/setAdvOption HideNoVoice=0

/ShowRoom 0

/Block @msn
/Block @hotmail

/Replace f*ck=****





Last edited by Max™ on Sat Aug 14, 2010 12:08 am; edited 13 times in total
Back to top Go down
http://maxtech.youneed.us
Steve™
Management

Management
avatar

Male
Number of posts : 2447
Home : At Home
Humor : If Im Not Back Later... Wait Longer
Registration date : 2007-07-30

PostSubject: Re: FXS 1.3.9 & FXS 1.3.10betta Tutorial & Config   Thu Aug 09, 2007 8:36 am

For anyone that wants to host on fxs1.3.10beta, heres the setup


it will connect using ws2_32dll

Unlike previous versions of FXServer, there is not a 'hosts' file, there is now three ways to connect your FXServer,
1. Connection through your WinMX on it’s Primary connection, (please note: if you close connection of Winmx, the FXServer will loose connection also)
2. Connect through Cache IP’s that you add directly to your config, you may add up to ten IP’s, this is explained lower down in the options and on the config.
3. Connect through the ws2_32DLL 3rd party connection patch, do not add the cache ip's in the relevent section in the config, pop the DLL in your FXS folder.

There is also a separate motd txt file as this you can add entry pictures to as they are with no need of \n or #newline# this makes the config less conjested and allows greater flexibility.

Click the icon to start your program, your firewall if you have one (you should for security) will ask for permission to allow the FXServer, click yes to allow full access (tick the remember this application if its available)

Each time you start the server, it will check for updates. Then the main screen will show.

The top Section is your user list, when you right click on a name in the user list you see options for adding or removing admin & access levels and changing formats.
The left screen shows the primaries that you are connected to, this is a suggested maximum of 3.
The main window is where you see all the commands including loading the config and general chat.

There are some check boxes for Preferences,
Show Room: This connects the primaries king your room show on the WinMX Peer Network Channels list.
Local Host is always Co Host: This is for auto host when you enter your room, you don't need an admin password when this is enabled.
Show Commands: Disable or Enable the Show Commands, this will show all commands including the sever commands in the main chat screen for everyone to see.
Appear Admin: Hide or Show the Admin status of the FXServer Host.
FXServer Host Name: Here you see the host name, the check box will hide or show the host name on screen when in normal conversation.

In the Menu Bar (top left) is FXServ, Language and Help (question mark)
Click FXServ, in a menu you see Options.

There are five tabs: Options, Passwords, Advanced1, Advanced2, WPN

The Options Tab:
Channel name: Enter your channel name here
Topic: Set your topic that will be displayed in the channel listing and on entering the room here.
Motd: Set what your Message Of The Day will be here.
Port: Set what port you want to use. This is best left at 6698.
User: This is where you can set the virtual number of users shown in the channel list.
Max Users Connections: This is the max number of users with the same IP that can enter, For example if a user enters with WinMX and a chat client.
Limit (max users allowed): this is how many users are allowed in the channel, (0 means nobody can enter)
Remove: This will allow you to remove some or all of the numbers that follow a user name. 9 Will remove the default ones WinMX Peer Network gives users.
Exile Default Room: This is to set a room to redirect users to.
Blocked Words: This will block those words and they wont show up in the channel screen to everyone, but admins will see them.
Word Replacement: This will allow you to add replacements for words you in the room.

The Passwords Tab:
This is where you can add new passwords or make adjustments to the passwords you have set.
This also has the room password setup with the amount of time allowed for an entry password and shows a correct or incorrect password message (if you have an entry password set up)

Advanced1 Tab:
Text Format: Lets you set the format of different admins or users. See the Configuration for more details.
Default Users, Agents, and Admins: This is where you can change which formats of text will be for each group of users in your room.

Rename Message:
This appears in the channel when a user changes his or her name.

Messages shown in channel or private for gaining @ or + status and correct login, these can be coloured to your own preference for the user list on the FXS window.
Messages shown in channel or private for loosing @ or + status and correct login.
You can add other messages for different levels (ie: someone has the k access can have a separate message to @ and + access)

Advanced2 Tab:
Auto Kick flooding: will kick people when they flood the room.
Allow Infinite Ban: self-explanatory.
Filter Spam: will kick someone out when they lost another complete channel name.
View Join Attempts: shows someone tring to enter that has been banned, or their name contains words in the Block list.
Show Connection Refused: when someone tries to enter with a same name or too many connections (RoboMX/Metis/WinMX).
Check Nickname Cloning: will kick someone trying to clone/copy another users nickname.
Colours Are Enabled: turn colours on or off.
Allow Nickname Colour: self-explanatory.
Don't Show Text From Devoiced Users: show or hide the text from devoiced users only visible by Admins.
Don’t Show /notice hides the /notice command from other admins, showing just the message.

Log Options:
Log To File logs the room to a file in the server folder.
Split Log: makes a new log file every day
Chat Window Limit: the amount of scroll space you see in main window (200 is the best setting to this)

Block Options:
Block /setuserlevel: This stops users with an * access from changing another users level.
Block /exile: This allows you to block the ability to use the /exile command.
Block /redirect This blocks the /redirect command.
Block /setcolour: stops users selecting a colour for messages.
Block /blind command: stops the ability to /blind a user (they cant see what you type)
Block /addpassword: disables the /addpassword command.
Block /notice: disables the no name command from being used.
Block /change uniform: disables the change uniform command used by Admins.
Block /ignore: disables the ignore command (does not affect your ignore feature on user list)

WPN Tab:
Shows preferred cache location. (1=North America, 2=South America, 3=Europe, 4=Asia, 5=Australia/NZ, 6=Africa)
Use List Of Caches
This is where you add up to ten cache IP’s and tick the checkbox to use the preferred caches.

WPN connections (maximum of 3 connections is recommended)

Make A Primary Connection To Local WinMX tck the checkbox and add the port number (6699 is default WinMX port) to connect FXS through your WinMX.
Please Note: if you disconnect your WinMX for any reason, your FXS will disconnect itself.

Next in the menu is Ban List:
A window opens showing you the option to ban an IP or ban both the nickname and IP, and lists the current ban information.

Next in the menu is Reload Config:
This will reload the config applying any changes you have made while FXServer is running (especially if you edited the Config file its self)

Next in the Menu is Save Config:
This will save any changes you have made when using the options menu.

Next in the menu is Refresh User List:
This will refresh the user list and apply with any changes you have made to a users status.

Next in the menu is Clear Log Window:
This will clear the channel window of all text.

Next in the menu is Exit:
This Exit the program, closing the channel.

Here is a list of commands, you can them in the main channel, by typing /help.
Any user can use these commands:
* Max <message> or /action <message> - Purple text
/motd - Show current motd
/viewtopic - Shows the current topic
/login <password> - Get a higher access level.
/colour - Show colours and their codes used
/setcolour <?> - Set your personal writing colour (replace ? with a number)
/level - Show your access level and stats
/version - Show server version
/channelname - Show the full channel name
/bot - Do not use colours (for bots)
/message <username> <message> - Send a message only to username
/stats - Show channel statictics
/ignore <username> - Don't display username's messages
/blind <username> - Don't display your message to username.

Only Admins can use these commands:
/opmsg <text> - admin message (only visible to admins)
/topic <topic> - Set a new room topic
/setmotd <motd> - Set a new motd
/limit - Set how many users are allowed in the room
/kick <Username> - Kick Username out of the room
/ban <Username> - Kick Username out of the room, and he/she will stay there
/kickban <Username> - Same as ban
/banip <IP> - Ban the specifyed IP. Use * to ban ip ranges. Ex: /banip 80.81.82.*
/kickip <IP> - Kick all the specifyed IPs out of the room
/unban <number> - Unban an IP, type /listbans to get the number you want
/listbans - Show the list of banned IPs
/voicelistbans - Show the list of voice banned IPs
/clearbans - Clear the ban list
/voiceclearbans - Clear the voice ban list
/level <username> - Show the username access level and stats
/notice <text> - Write text without the nickname
/addpassword <password>=<access> - Add a password for the spec. access level
/exile <username> [chatroom] - Exile username to chatroom
/exileroom [chatroom] - Set the default chatroom for /exile command
/redirect <chatroom> - Redirect room to another
/disablecolour - Disable colours. Colour codes will be ignored.
/enablecolour - Restore colours in the chatroom
/showroom <1|0> - Show/Hide the room (connect/disconnect the WPN)
/blind <username> - Don't display your message to username.
/changeuniform [username] - Switches the @ and + symbols. For Admins; if username is empty apply to self
/logout - Reset your access level to the default one
/helplevel - Show information about access levels

Other commands used by the Host:
/forcelogin - This is where you can force a login.
/setchannelname - This will set the channel name.
/setchannelname2 - This will allow you to show two rooms on the WPN listings (NOTE: You can only set one topic however for both rooms)
/chatpassword - Sets a channel password for private rooms.

Level help commands in channel

Syntax of command /setuserlevel:
/setuserlevel <username> <+ or - ><access>
/setuserlevel <username> reset reset to default access
Use '+' to add, and '-' to remove. 'access' is one of the following letters:
    v - Voice. Enable user to talk to the chat
    a- Action. Able to use /action or /me command.
    c - Colour. Able to use /setcolour command.
    C - Caps. Able to use capital letters in text.
    k - Kick. Able to kick someone and to remove someone's voice
    K - Kick. Able to kick someone, Admins/Agents included
    b - Ban. Able to kick and ban someone or an IP and to use ban commands like /unban
    B - Ban. Able to kick and ban someone, Admins/Agents included
    U - Unban. Able to use /unban
    L - Unban. Able to use /listbans
    t - Topic. Able to change the topic (/topic command)
    m - Motd. Able to change the motd (/setmotd command).
    w - Watch commands. Able to see commands of other people
    i - Watch IPs. Able to see users IPs
    l - Watch levels. Able to see users level
    M - Able to see the Messages for the admins and messages sent with /opmsg
    n - Able to use /notice command
    N - Able to send multiple lines to the room with #NEWLINE# or \n
    p - Can send private messages to the room with /message command
    q - Allowed to make multiple connections to the chat (you can join the room with many nicknames as you want)
    J - Can see kick/ban notification messages
    j - Can see who kicks or bans someone
    + - Show a + in front of the name in the user list. (When you get this one a message is sent to the chat)
    @ - Show a @ in front of the name in the user list. (When you get this one a message is sent to the chat)
    r - Able to Redirect the channel to another one
    f - Flood. Able to flood
    * - Able to change other people's level. You must be an Admin to be able to use this.
    FN- Set the text format for that user. Replace N with the number of the text format defined by the command /TextFormat

Admins get all of these automatically.
To use the other commands, you must be an Admin.
Example: /setuserlevel Badboy123_12345 -cv
Example: /setuserlevel Goodboy987_98765 +bt (means +kbt)

Below is a sample of the config.txt document.
it includes Vital info on connecting the 1.3.10betta version.





Last edited by Max™ on Thu Jul 23, 2009 11:39 am; edited 1 time in total
Back to top Go down
http://maxtech.youneed.us
Steve™
Management

Management
avatar

Male
Number of posts : 2447
Home : At Home
Humor : If Im Not Back Later... Wait Longer
Registration date : 2007-07-30

PostSubject: Re: FXS 1.3.9 & FXS 1.3.10betta Tutorial & Config   Thu Aug 09, 2007 8:38 am

for the FXS 1.3.10Betta only
Quote :
Language=ENG

/Port 6698

/setchannelname Test Room
/topic Test Room topic

/TextFormat 1=#c2#<$NAME$#c2#> #c1#$TEXT$
/TextFormat 2=#c6#<#c2#$NAME$#c6#> #c1#$TEXT$
/TextFormat 3=#c7#<#c2#$NAME$#c7#> #c1#$TEXT$
/TextFormat 4=#c2#$NAME$ #c1#$TEXT$

/DefaultAccess acCvJj

/DefaultFormat User=1
/DefaultFormat +=2
/DefaultFormat Admin=3

/addPassword agentpassw=blw+=2
/addPassword adminpassw=A

/Users 0
/Limit 600
/TrimName 9
/MaxConnections 2
/TrimName 9

/Zone (1=North America, 2=South America, 3=Europe, 4=Asia, 5=Australia/NZ, 6=Africa)

/WpnConnections 3

/ConsoleName Server123_23454

/ChatPassword
/ChatPasswordOpt Msg=Channel is password-protected. Please type the password.
/ChatPasswordOpt Correct=Password OK
/ChatPasswordOpt Wrong=Wrong password, disconnecting...
/ChatPasswordOpt TimedOut=Timed out, disconnecting...
/ChatPasswordOpt TimeOutMs=15000

/BlockCommand Redirect=1
/BlockCommand Exile=0
/BlockCommand addPassword=1
/BlockCommand Notice=1
/BlockCommand SetUserLevel=0
/BlockCommand ChangeUniform=0
/BlockCommand SetColour=0
/BlockCommand Ignore=0
/BlockCommand Blind=0

/setAdvOption FloodKick=1
/setAdvOption AllowInfiniteBan=1
/setAdvOption FilterSpam=1
/setAdvOption AutoAdmin=1
/setAdvOption checkNameCloning=1
/setAdvOption NickColours=1
/setAdvOption ColourCodesVisible=0
/setAdvOption ViewJoinAttempts=1
/setAdvOption ShowRefused=1
/setAdvOption RenameMessage=$OLDNAME$ #c8#is now known as $NEWNAME$

/setAdvOption GetMsg=Co-Host=0,128,64=$NAME$ is now Co-Host
/setAdvOption GetMsg=A=255,128,0=$NAME$ is Admin
/setAdvOption GetMsg=b=255,128,0=$NAME$ can ban
/setAdvOption GetMsg=+=0,128,192=$NAME$ has got the +
/setAdvOption GetMsgPr=v=255,255,255=You have voice again
/setAdvOption GetMsgPr=U=255,255,255=Correct password!
/setAdvOption GetMsgPr=@=255,255,255=Correct password!
/setAdvOption LoseMsg=Co-Host=$NAME$ is not a C0-Host anymore
/setAdvOption LoseMsg=A=$NAME$ is not an Admin anymore
/setAdvOption LoseMsg=b=$NAME$ cannot ban
/setAdvOption LoseMsg=+=$NAME$ has lost the +
/setAdvOption LoseMsgPr=v=You have no voice

/setAdvOption ListColourDefault=128,0,0
/setAdvOption ListColourBot=255,0,255

/setAdvOption LogLimit=200
/setAdvOption SplitLog=0
/setAdvOption ChatLog=0
/setAdvOption HideNoVoice=0
/setAdvOption HideNotice=0

/setWpnOption UseLocalWinmx=0 <--- set to 1 this connects through WinMX
/setWpnOption LocalWinmxPort= <--- add the port for WinMX if using it to connect (6699 default)
/setWpnOption UsePeerCacheList=1 <--- set to 1 if using peer caches (I have included an example)
/setWpnOption AddPeerCache=207.210.117.60
/setWpnOption AddPeerCache=
/setWpnOption AddPeerCache=
Code:
Remove these ---> /setWpnOption AddPeerCache= if you use the ws2_32DLL
Code:
Leave this as it is ---> /setWpnOption UsePeerCacheList=1 <--- set to 1 or it wont connect
/AutoUpdate 1 <--- This allows the server to check for new/updated versions.
/ShowRoom 1 <--- Set to 1 for auto activation of channel, set to 0 for manual activation.

These useful functions can help keep your chat room from becoming anarchy central, /Block & /Replace (make a new entry for each word required)

/Block xxxx <--- word to block goes here, it will block names from entering too.
/BlockK xxxx <--- Adding K on /Block will kick the user that says or changes name to include the blocked word.
/BlockB xxxx <--- Adding B on /Block will kick and ban the user that says or changes name to include the blocked word.

/Replace crap=c**p <--- You can place a word that will be replaced here (make one for each word required)



Back to top Go down
http://maxtech.youneed.us
Sponsored content




PostSubject: Re: FXS 1.3.9 & FXS 1.3.10betta Tutorial & Config   

Back to top Go down
 
FXS 1.3.9 & FXS 1.3.10betta Tutorial & Config
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Tutorial for how to use storeEval command to get property of an element.
» Query - web driver element click is not working
» start selenium 2 with Internet Explorer.
» Any video/flash tutorials available for selenium?
» VPS with relay server based PC2Phone & mobile dialer at $499

Permissions in this forum:You cannot reply to topics in this forum
MaxTech ::  The World Of WinMX Chat :: WinMX, Server, Client, & Bot Tutorials-
Jump to: